Lightning Powder Liquid Glue Hot Plate

Liquid Glue Hot Plate.

The Lightning Powder Liquid Glue Hot Plate is used to make the evidence to be photographed clearer and easier. The fuming process, if wanted, can be accelerated to reduce the time required to process the evidence. It comes with easy to follow instructions like place a hot plate and the aluminum dish inside the fuming chamber. Put five to ten drops of liquid glue in the 2" diameter x 1.5 deep dish inside the fuming chamber. Simply place a cup of warm water in the chamber and the evidence on top of the cup and turn on the hot plate. To avoid over fuming when the heat is applied, make sure that you watch or time the fuming process.

Accelerate the cyanocrylate fuming process by placing a hot plate and aluminum dish inside the fuming chamber. Place five to ten drops of liquid glue into the 2" diameter X 1.5 deep dish inside the fuming chamber. Squeeze about five to ten drops of liquid glue into the dish. Place the evidence and a cup of warm water into the chamber and turn on the hot place. It is important to time or to watch the fuming process, as it is easy to over fume when heat is applied.

This hot plate gets hot enough to effectively warm the glue for the fuming process without getting so hot as to make the process dangerous. It has been reported that if the glue becomes too hot, toxic fumes will be produced. The aluminum dish with the dried glue can be safely discarded.