Paulson Tactical Laser Shield for BS-3 & BS-9 Riot Shields

Paulson Tactical Laser Shield for BS-3 & BS-9 Riot Shields

The Paulson Tactical Laser Shield for BS-3 & BS-9 Riot Shields is a protective wear for army and police professionals that require protection against the biological hazards of laser. Since direct exposure to laser can damage the eyesight, the shield works towards eliminating the dazzling effect of red, blue, green, and violet color lasers.

It safeguards your eyes during riots while allowing a small amount of laser to pass through the shield. This allows detection of source of the laser with minimal chances of any harm. Moreover, the polycarbonate built shield does not require any additional tools since its body shield lens can be easily attached using Velcro. The dark gray colored shield should be reviewed by a Laser Safety Officer (LSO) for safety level determing.

Specifications:

• Color: Dark Grey
• Material: Polycarbonate
• Product Weight: 117 g
• Specification: ANSI Z136
• Visible Light Transmittance: >3%
• Hazard Analysis & Training: A Laser Safety Officer (LSO) should review the laser hazard and determine the protection level required
• Field mount, no tools required (body shield lens attaches w/ Velcro)
• Blocks all 4 types of lasers on the spectrum (blue, green, red, violet)
• Allows a small amount of the laser through the lens (below a harmful level) so the beam can be seen and the person holding the laser can hopefully be identified